How (and Why) I Run My Own DNS Servers


Despite my woeful knowledge of networking, I run my own DNS servers on my own websites run from home.

I achieved this through trial and error and now it requires almost zero maintenance, even though I don’t have a static IP at home.

Here I share how (and why) I persist in this endeavour.


This is an overview of the setup:


This is how I set up my DNS. I:

  • got a domain from an authority (a .tk domain in my case)
  • set up glue records to defer DNS queries to my nameservers
  • set up nameservers with static IPs
  • set up a dynamic DNS updater from home


Walking through step-by-step how I did it:

1) Set up two Virtual Private Servers (VPSes)

You will need two stable machines with static IP addresses.

If you’re not lucky enough to have these in your possession, then you can set one up on the cloud. I used this site, but there are plenty out there.  NB I asked them, and their IPs are static per VPS. I use the cheapest cloud VPS (1$/month) and set up debian on there.

NOTE: Replace any mention of DNSIP1 and DNSIP2 below with the first and second static IP addresses you are given.

Log on and set up root password

SSH to the servers and set up a strong root password.

2) Set up domains

You will need two domains: one for your dns servers, and one for the application running on your host.

I use to get free throwaway domains. In this case, I might setup a DNS domain and a site domain.

Whatever you choose, replace your DNS domain when you see YOURDNSDOMAIN below. Similarly, replace your app domain when you see YOURSITEDOMAIN below.

3) Set up a ‘glue’ record

If you use as above, then to allow you to manage the YOURDNSDOMAIN domain you will need to set up a ‘glue’ record.

What this does is tell the current domain authority ( to defer to your nameservers (the two servers you’ve set up) for this specific domain. Otherwise it keeps referring back to the .tk domain for the IP.

See here for a fuller explanation.

Another good explanation is here.

To do this you need to check with the authority responsible how this is done, or become the authority yourself. has a web interface for setting up a glue record, so I used that.

There, you need to go to ‘Manage Domains’ => ‘Manage Domain’ => ‘Management Tools’ => ‘Register Glue Records’ and fill out the form.

Your two hosts will be called ns1.YOURDNSDOMAIN and ns2.YOURDNSDOMAIN, and the glue records will point to either IP address.

Note, you may need to wait a few hours (or longer) for this to take effect. If really unsure, give it a day.

If you like this post, you might be interested in my book Learn Bash the Hard Way, available here for just $7

4) Install bind on the DNS Servers

On a Debian machine (for example), and as root, type:

apt install bind9

bind is the domain name server software you will be running.

5) Configure bind on the DNS Servers

Now, this is the hairy bit.

There are two parts this with two files involved: named.conf.local, and the db.YOURDNSDOMAIN file.

They are both in the /etc/bind folder. Navigate there and edit these files.

Part 1 – named.conf.local

This file lists the ‘zone’s (domains) served by your DNS servers.

It also defines whether this bind instance is the ‘master’ or the ‘slave’. I’ll assume ns1.YOURDNSDOMAIN is the ‘master’ and ns2.YOURDNSDOMAIN is the ‘slave.

Part 1a – the master

On the master/ns1.YOURNDSDOMAIN, the named.conf.local should be changed to look like this:

 type master;
 file "/etc/bind/db.YOURDNSDOMAIN";
 allow-transfer { DNSIP2; };
 type master;
 file "/etc/bind/YOURDNSDOMAIN";
 allow-transfer { DNSIP2; };

zone "" {
 type master;
 notify no;
 file "/etc/bind/db.75";
 allow-transfer { DNSIP2; };

logging {
 channel query.log {
 file "/var/log/query.log";
 // Set the severity to dynamic to see all the debug messages.
 severity debug 3;
category queries { query.log; };

The logging at the bottom is optional (I think). I added it a while ago, and I leave it in here for interest. I don’t know what the 14.127 zone stanza is about.

Part 1b – the slave

On the slave/ns2.YOURNDSDOMAIN, the named.conf.local should be changed to look like this:

 type slave;
 file "/var/cache/bind/db.YOURDNSDOMAIN";
 masters { DNSIP1; };

 type slave;
 file "/var/cache/bind/db.YOURSITEDOMAIN";
 masters { DNSIP1; };

zone "" {
 type slave;
 file "/var/cache/bind/db.75";
 masters { DNSIP1; };


Now we get to the meat – your DNS database is stored in this file.

On the master/ns1.YOURDNSDOMAIN the db.YOURDNSDOMAIN file looks like this:

$TTL 4800
  2018011615 ; Serial
  604800 ; Refresh
  86400 ; Retry
  2419200 ; Expire
  604800 ) ; Negative Cache TTL

On the slave/ns2.YOURDNSDOMAIN it’s very similar, but has ns1 in the SOA line, and the IN NS lines reversed. I can’t remember if this reversal is needed or not…:

  2018011615 ; Serial
 604800 ; Refresh
 86400 ; Retry
 2419200 ; Expire
 604800 ) ; Negative Cache TTL

A few notes on the above:

  • The dots at the end of lines are not typos – this is how domains are written in bind files. So is written
  • The YOUREMAIL.YOUREMAILDOMAIN. part must be replaced by your own email. For example, my email address: becomes  Note also that the dot between first and last name is dropped. email ignores those anyway!
  • YOURDYNAMICIP is the IP address your domain should be pointed to (ie the IP address returned by the DNS server). It doesn’t matter what it is at this point, because….

the next step is to dynamically update the DNS server with your dynamic IP address whenever it changes.

6) Copy ssh keys

Before setting up your dynamic DNS you need to set up your ssh keys so that your home server can access the DNS servers.

NOTE: This is not security advice. Use at your own risk.

First, check whether you already have an ssh key generated:

ls ~/.ssh/id_rsa

If that returns a file, you’re all set up. Otherwise, type:


and accept the defaults.

Then, once you have a key set up, copy your ssh ID to the nameservers:

ssh-copy-id root@DNSIP1
ssh-copy-id root@DNSIP2

Inputting your root password on each command.

If you like this, you might like one of my books:
Learn Bash the Hard Way

Learn Git the Hard Way
Learn Terraform the Hard Way


7) Create an IP updater script

Now ssh to both servers and place this script in /root/

set -o nounset
sed -i "s/^(.*) IN A (.*)$/1 IN A $1/" /etc/bind/db.YOURDNSDOMAIN
sed -i "s/.*Serial$/ $(date +%Y%m%d%H) ; Serial/" /etc/bind/db.YOURDNSDOMAIN
/etc/init.d/bind9 restart

Make it executable by running:

chmod +x /root/

Going through it line by line:

  • set -o nounset

This line throws an error if the IP is not passed in as the argument to the script.

  • sed -i "s/^(.*) IN A (.*)$/1 IN A $1/" /etc/bind/db.YOURDNSDOMAIN

Replaces the IP address with the contents of the first argument to the script.

  • ​​​sed -i "s/.*Serial$/ $(date +%Y%m%d%H) ; Serial/" /etc/bind/db.YOURDNSDOMAIN

Ups the ‘serial number’

  • /etc/init.d/bind9 restart

Restart the bind service on the host.

8) Cron Your Dynamic DNS

At this point you’ve got access to update the IP when your dynamic IP changes, and the script to do the update.

Here’s the raw cron entry:

* * * * * curl 2>/dev/null > /tmp/ip.tmp && (diff /tmp/ip.tmp /tmp/ip || (mv /tmp/ip.tmp /tmp/ip && ssh root@DNSIP1 "/root/ $(cat /tmp/ip)")); curl 2>/dev/null > /tmp/ip.tmp2 && (diff /tmp/ip.tmp2 /tmp/ip2 || (mv /tmp/ip.tmp2 /tmp/ip2 && ssh root@ "/root/ $(cat /tmp/ip2)"))

Breaking this command down step by step:

curl 2>/dev/null > /tmp/ip.tmp

This curls a ‘what is my IP address’ site, and deposits the output to /tmp/ip.tmp

diff /tmp/ip.tmp /tmp/ip || (mv /tmp/ip.tmp /tmp/ip && ssh root@DNSIP1 "/root/ $(cat /tmp/ip)"))

This diffs the contents of /tmp/ip.tmp with /tmp/ip (which is yet to be created, and holds the last-updated ip address). If there is an error (ie there is a new IP address to update on the DNS server), then the subshell is run. This overwrites the ip address, and then ssh’es onto the

The same process is then repeated for DNSIP2 using separate files (/tmp/ip.tmp2 and /tmp/ip2).


You may be wondering why I do this in the age of cloud services and outsourcing. There’s a few reasons.

It’s Cheap

The cost of running this stays at the cost of the two nameservers (24$/year) no matter  how many domains I manage and whatever I want to do with them.


I’ve learned a lot by doing this, probably far more than any course would have taught me.

More Control

I can do what I like with these domains: set up any number of subdomains, try my hand at secure mail techniques, experiment with obscure DNS records and so on.

I could extend this into a service. If you’re interested, my rates are very low :)

If you like this post, you might be interested in my book Learn Bash the Hard Way, available here for just $7


If you liked this post, you might also like:

Create Your Own Git Diagrams

Ten Things I Wish I’d Known About bash

Ten More Things I Wish I’d Known About bash

Project Management as Code with Graphviz

Ten Things I Wish I’d Known Before Using Jenkins Pipelines

Get 39% off Docker in Practice with the code: 39miell2

24 thoughts on “How (and Why) I Run My Own DNS Servers

  1. Dumb question, but I get the impression these DNS servers and only used to allow RoW to see your locally-hosted sites. Do you also use them yourself as a client for all your web browsing needs? I am more or less suspicious of the available free DNS options (my ISP, OpenDNS, Google, etc.) and am interested to know whether your howto might be a way out of that.



  2. You don’t need the convoluted “what’s my ip” part. The information is available to the server you run in *because you are connecting to it from that
    IP address*. You could run “who” in that script and get the address, for example. You don’t need to, though. SSH conveniently sets an environment variable
    containing the IP address you are connecting from. Try running “echo $ SSH_CLIENT” in the server. The first field contains the IP address.

  3. You should also restrict the commands run when you authenticate with the ssh key using the command=”command” option for the key. Since now you don’t need to pass the IP address as an argument then it becomes very easy with something like this in authorized_keys:

    command=”/root/”,no-port-forwarding,no-X11-forwarding,no-agent-forwarding ssh-dss XXXXXXXXXXXX………..

    You could even create a non-privileged account in the DNS1 and DNS2 server whose shell is and then use command=”” in the line above (That is, the key can’t be used to run any command, but the account’s shell would be invoked anyway upon connection). Then you can restrict the commands you run in there via sudo.

  4. Hi, I look up on you.
    When you mentioned ‘running’ the server at 24$/y., are you speaking of running or domain costs? I am now wondering if this was to suggest: I do not need to pay my domain names to godaddy ever again every year at 12euro the domain. ;)

  5. pretty close to what i did when i first started with Linux :)
    although i actually hosted the DNS service on my own server (i didn’t have a secondary , even if it’s commanded) since i had a static IP from the ISP.
    on the same server i had an email server, a webserver, a direct connect hub and a VPN server

    in your case, another way to push updates to the DNS servers could be done by enabling dynamic updates in bind for the hosted zone, and use nsupdate to update your RRs , which can be scripted as well …similar to lftp

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.